Wiser PowerTag Energy - energy meter PT R9 3P+N down

PowerTag Energy is a wirelessly communicating energy sensor designed for energy management in both new and renovated buildings. Together with the Wiser hub, PowerTag Energy monitors the energy consumption of the home in real-time, up to 63A. The device can be installed in the distribution board in minutes.

When wirelessly connected to the Wiser system, PowerTag enables additional features such as electricity market price tracking and the use of automations (available in Q3/2023).

Wiser automation conditions can also use measurements from PowerTag:
-Load status (on/off)
-Instantaneous total power (W)
-Daily consumption (over X kWh)
-Monthly consumption (over X kWh)

Frequency: 50Hz Voltage (1 phase): 200...240 V AC
Voltage (3 phase): 380...415 V AC
Maximum current: 63A
Operating temperature: -25°C...60°C
Overvoltage protection (IEC 61010-1): Class III
Measurement category: (IEC 61010-2-30): Class III
Measurement accuracy: (IEC 61557-12): Class 1
Protection class: IP20, IK05
Radio frequency: 2.4GHz...2.4835GHz
Shortest communication interval: 5s

Full use of Schneider Electric's Wiser system requires a hub (CCT501901, Matter-certified), the Wiser by SE smartphone application, a user account, and an internet connection. Use of the system is free of charge. The device is intended for indoor use.

It is recommended to install one PowerTag in the application, which is displayed as "Electricity Grid" - the home's total consumption meter. Other PowerTags can be added under this to measure other groups.