Key Specifications
Choose one or multiple features to search for items that have the same specifications.| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 48 |
| SFP/SFP+ slots quantity | 4 |
| Gigabit Ethernet (copper) ports quantity | 48 |
| Fiber ports quantity | 4 |
| Installed SFP modules quantity | 4 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| SFP+ module slots quantity | 4 |
| USB Type-A ports quantity | 1 |
| Weight & dimensions | |
| Weight | 5.03 kg |
| Height | 432 mm |
| Width | 440 mm |
| Depth | 310 mm |
| Energy management | |
| Power consumption (typical) | 49 W |
| Power source | AC |
| Power consumption (max) | 861 W |
| Operational conditions | |
| Operating relative humidity (H-H) | 0 - 90% |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 0 - 95% |
| Heat dissipation | 2944.6 BTU/h |
| Networking | |
| Full duplex | ![]() |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3x |
| Flow control support | ![]() |
| Port mirroring | ![]() |
| Link aggregation | ![]() |
| Broadcast storm control | ![]() |
| Rate limiting | ![]() |
| DHCP client | ![]() |
| IP routing | ![]() |
| Ethernet LAN data rates | 10/100/1000 Mbit/s |
| Auto MDI/MDI-X | ![]() |
| Number of VLANs | 256 |
| Spanning tree protocol | ![]() |
| VLAN support | ![]() |
| 10G support | ![]() |
| Ethernet interface type | Gigabit Ethernet |
| Auto-sensing | ![]() |
| Auto-negotiation | ![]() |
| IPv4 routes | 32 |
| IPv6 routes | 32 |
| Data transmission | |
| MAC address table | 16000 entries |
| Supported data transfer rates | 10/100/1000 |
| Switching capacity | 104 Gbit/s |
| Maximum data transfer rate | 104 Gbit/s |
| Jumbo frames support | ![]() |
| Store-and-forward | ![]() |
| Forwarding rate | 77.4 Mpps |
| Packet buffer memory | 1.5 MB |
| Latency (10-100 Mbps) | 9.617 µs |
| Latency (1 Gbps) | 4.411 µs |
| Throughput | 77.4 Mpps |
| Number of static routes | 32 |
| Static route | ![]() |
| Security | |
| Access Control List (ACL) | ![]() |
| SSH/SSL support | ![]() |
| IGMP snooping | ![]() |
| Password protection | ![]() |
| Loop protection | ![]() |
| Access Control List (ACL) rules | 100 |
| 100 | |
| DHCP features | DHCP snooping, DHCPv6 client |
| Certificates | |
| Certification | CE, FCC Class A, RCM, ICES Class A, VCCI, KC, BSMI, UKCA |
| Management features | |
| Switch layer | L2/L3/L4 |
| Quality of Service (QoS) support | ![]() |
| Web-based management | ![]() |
| Switch type | Managed |
| Traffic classification | ![]() |
| Traffic shaping | ![]() |
| ARP inspection | ![]() |
| Cloud-managed | ![]() |
| Other features | |
| Bandwidth | 104 Gbit/s |
| Design | |
| Rack mounting | ![]() |
| Form factor | Rack-mountable |
| Product colour | Grey |
| Stackable | ![]() |
| Number of fans | 3 fan(s) |
| Redundant fans support | ![]() |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | ![]() |
| Power over Ethernet (PoE) ports quantity | 48 |
| Power over Ethernet plus (PoE+) ports quantity | 48 |
| Total Power over Ethernet (PoE) budget | 760 W |
| Power over Ethernet (PoE) power per port | 760 W |
| Performance | |
| Processor frequency | 800 MHz |
| Internal memory | 512 MB |
| Processor model | ARM Cortex-A55 |
| Mean time between failures (MTBF) | 1296949 h |
| Flash memory | 64 MB |
| Processor manufacturer | ARM |
| Noise level | 39.3 dB |
| Firmware upgradeable | ![]() |
| Built-in processor | ![]() |
| Multicast features | |
| Multicast support | ![]() |
| Number of multicast groups filtered | 512 |
| EAN | 0606449162561 |
| Warranty | 1 year |
The NETGEAR GS752TPP-300EUS 48-Port Gigabit PoE+ Smart Managed Pro Switch is a Layer 2+ and Layer 3 Lite device designed for enterprise networks. It features 48 RJ-45 ports providing data and Power over Ethernet, along with four dedicated SFP slots for fiber uplinks. With a 104 Gbit/s switching capacity and a 77.4 Mpps forwarding rate, the switch manages high-traffic network environments. It supports the simultaneous operation of connected endpoints, such as IP cameras and wireless access points, using a store-and-forward switching mechanism.
Housed in a standard rack-mountable chassis, the switch uses three active fans, operating at a noise level of 39.3 dB. It offers a 760 W PoE budget, allowing endpoint hardware to be powered directly through the network cabling. Configuration is managed via a web-based interface, SSH/SSL, or the NETGEAR Insight cloud platform. Internal routing supports up to 32 static routes to reduce the processing load on core routers. For traffic management, the model supports 256 active VLANs, Quality of Service (QoS) prioritization, and up to 100 access control list rules.
Key Features:- MAC address table capacity of 16,000 entries and a 1.5 MB packet buffer for performance on busy subnets.
- Network latency of 4.411 µs for 1 Gbps connections, reducing transmission delay for time-sensitive data.
- Link aggregation (LACP) support, allowing multiple physical ports to be combined for redundancy and increased throughput.
- Multicast management, including IGMP snooping and filtering for up to 512 multicast groups.
- Mean time between failures (MTBF) of 1,296,950 hours, indicating hardware reliability.
Estimated delivery: 09.09 - 14.09
Today: 10:00 - 18:00
Estimated delivery: 09.09 - 14.09
Today: 09:00 - 17:00
Estimated delivery: 09.09 - 14.09
Today: 10:00 - 17:00
Estimated delivery: 09.09 - 14.09
Today: 10:00 - 18:00
Estimated delivery: 09.09 - 14.09
Today: 10:00 - 17:00
Estimated delivery time: 09.09 - 14.09
Estimated delivery time: 09.09 - 13.09
Estimated delivery time: 10.09 - 14.09
Estimated delivery time: 10.09 - 14.09
Estimated delivery time: 10.09 - 13.09
Estimated delivery time: 09.09 - 14.09
Estimated delivery time: 09.09 - 14.09
Estimated delivery time: 10.09 - 13.09
- manual pdf (English)
- leaflet (English)
- manual pdf (English)


