NETGEAR ProSAFE M4100-50G-PoE - Kytkin - L2+ - Hallinnoitu - 50 x 10/100/1000 + 4 x jaettu SFP - työpöytä, räkkiin asennettava - PoE+ (380 W)
This product is end of life or currently not available.
Ports & interfaces | |
USB 2.0 ports quantity | 1 |
Console port | RS-232 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Basic switching RJ-45 Ethernet ports quantity | 50 |
SFP module slots quantity | 4 |
Weight & dimensions | |
Weight | 4.96 kg |
Height | 43.2 mm |
Width | 440 mm |
Depth | 310 mm |
Energy management | |
Power consumption (typical) | 555.50 W |
Operational conditions | |
Operating altitude | 0 - 3000 m |
Operating relative humidity (H-H) | 0 - 90% |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 0 - 50 °C |
Storage relative humidity (H-H) | 0 - 95% |
Non-operating altitude | 0 - 3000 m |
Heat dissipation | 1.896 BTU/h |
Networking | |
Networking standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Flow control support | |
Port mirroring | |
Link aggregation | |
Broadcast storm control | |
Rate limiting | |
Number of VLANs | 1024 |
Spanning tree protocol | |
VLAN support | |
10G support | |
Data transmission | |
MAC address table | 16000 entries |
Switching capacity | 100 Gbit/s |
Jumbo frames support | |
Latency (10-100 Mbps) | 10.194 µs |
Latency (1 Gbps) | 3.91 µs |
Jumbo frames | 9000 |
Packaging data | |
Manual | |
Security | |
Access Control List (ACL) | |
SSH/SSL support | |
IGMP snooping | |
Management features | |
Switch layer | L2+/L3 |
Quality of Service (QoS) support | |
System event log | |
Switch type | Managed |
Other features | |
Power LED | |
Design | |
Certification | - CE mark, commercial - FCC Part 15 Class A, VCCI Class A - Class A EN 55022 (CISPR 22) Class A - Class A C-Tick - EN 50082-1 - EN 55024 |
Rack mounting | |
Safety | CE, CSA, UL, CB, CCC |
Product colour | Grey |
Stackable | |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | |
Power over Ethernet plus (PoE+) ports quantity | 48 |
Total Power over Ethernet (PoE) budget | 380 W |
Performance | |
Internal memory | 128 MB |
Mean time between failures (MTBF) | 239.298 h |
Flash memory | 32 MB |
Noise level | 47.7 dB |
sFlow | |
Multicast features | |
Multicast support | |
EAN | 606449088038 |
Warranty | 1 year |
Source: Icecat.biz |
- Fully managed switches with CLI and scripting
- From 8 ports Fast Ethernet to 50 ports Gigabit
- Static Layer 3 routing with 64 IP interfaces
- High-end PoE 802.3af and PoE+ 802.3at
- RPS and EPS options up to 1,440W budget
- Private VLANs, LLDP-MED and MVR
The NETGEAR® Intelligent Edge M4100 series consists of 12 fully managed switches, ranging from 8-port Fast Ethernet to 50-port Gigabit Ethernet.
They are ideal for all organizations considering reliable, affordable and simple access layer switching with CLI, advanced scripting capabilities and Layer 3 routing.
As a cost-effective component of converged voice, video and data networking solutions, NETGEAR M4100 series delivers a secure edge in commercial buildings and campus LAN environments: PoE (802.3af) and PoE+ (802.3at) versions of M4100 series are perfect for Wireless access points, IP telephony and IP surveillance deployments.
Layer 2+ with static routing
- M4100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M4100 series hardware with 64 static routes (IPv4)
Engineered for convergence
- Automatic multi-vendor Voice over IP prioritization based on SIP, H323 and SCCP protocol
- Voice VLAN and LLDP-MED for automatic IP phones QoS and VLAN configuration
- Advanced classifier-based hardware for L2, L3, L4 security and prioritization
- Advanced Multicast filtering with IGMP and MLD snooping and querier modes
High-value performance and IPv6 ready
- 16K MAC addresses; up to 100Gbps switching fabric; 9K jumbo frames; Green Ethernet
- IPv4/IPv6 ingress traffic filtering (ACLs) and prioritization (QoS - DiffServ)
High availability and PoE/PoE+ full power capability
- Redundant power supply option for uninterruptible operation (RPS)
- External power supply option for PoE and PoE+ full power applications (EPS up to 1,440W)
Industry standard management
Industry standard command line interface (CLI)
Fully functional NETGEAR web interface (GUI)
Industry leading warranty
NETGEAR M4100 series is backed by NETGEAR ProSafe Lifetime Hardware Warranty
Also included ProSupport Lifetime 24x7 Advanced Technical Support
Also included 3-Year Next Business Day Onsite Hardware Replacement
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 09:00 - 17:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 10:00 - 17:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 10:00 - 17:00
Estimated delivery: Unknown
Today: 10:00 - 18:00