NETGEAR MSM4320-100NES (M4350-16M4V) - Switch, Black

The NETGEAR MSM4320-100NES (M4350-16M4V) is a fully managed Layer 3 switch with 16 downlink ports and four fiber uplinks. The RJ-45 interfaces operate at 2.5G speeds and provide PoE++ to connected endpoints. With a 280 Gbit/s switching capacity and a 208.3 Mpps forwarding rate, the device processes high-bandwidth traffic. Four 25G SFP28 slots support high-speed backbone aggregation. These specifications are suitable for applications such as high-resolution IP cameras or multi-gigabit wireless access points.

The 1U rack-mount chassis contains dual internal power supplies and four cooling fans, which produce 35.6 dB of noise. A total PoE budget of 530 W allows high-draw hardware to be powered directly via Ethernet. Administrators can configure the switch via a web interface or the USB Type-C console port. Routing protocols—including OSPF, VRRP, and static routing—support up to 4,000 active VLANs. Traffic management is handled through access control lists (ACLs) and quality of service (QoS) prioritization.

• 16,000-entry MAC address table and 32 MB packet buffer for managing large numbers of endpoints.
• 1.8 GHz ARM Cortex-A57 processor with 4 GB of DDR4 SDRAM for routing operations.
• Support for 12,000-byte jumbo frames to transmit large data packets across the local area network.
• Stackable architecture, allowing multiple compatible switches to be linked and managed as a single logical unit.
• Measured latency of 5.5 μs at 2.5 Gbps and under 0.7 μs at 10 Gbps for time-sensitive traffic.